Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've a problem in delay dialing(abt 30 sec) only to the DN 200 configured to any phone(7912 in my location)If I change any other DN to that paticular phone there is no delay.I've also changed the T320 timers no result.Although T320 timers appiled to ...
Hi,I'm configuring AAA for 4510 switch.All other routers & switches(29xx) are working properly with AAA server.However for 4510 there is a problem in authentication neogotiation with AAA server.Below is AAA config and debug aaa new-modelaaa authentic...
Hi,Any one can help...I have set up AAA on my network.aaa authentication login default group tacacs+ group security localaaa authorization exec default group tacacs+ group security localaaa accounting exec default start-stop group tacacs+ group secur...
Hi, I'm using cisco3825 as a voice gateway with concerto dialer software for outbound dialing for a call center.Agents are facing voice problems :like they can hear the customer but customer can't hear them.But it's not for all the agents at a time. ...
Hi, I'm using cisco3825 as a voice gateway with concerto dialer software for outbound dialing for a call center.Agents are facing voice problems :like they can hear the customer but customer can't hear them.But it's not for all the agents at a time. ...
as routing is always firstly match the longest prefix in this case 2nd one 255.255.255.255 prefix is /32if you add any route later whose prefix length is less like /24 or /0 then always /32 route would be preferHope this will clear & if pl rate
