Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi allDoes anybody know how to increase server timeout more than 30 sec, may be 60 sec.Our LDAP structure very deep, 5 levels - I mean login accounts placed on the 5th level from the top.I configureed web-authentication via LDAP, for test I created n...
Hi allI ahve some problem with web authentication via LDAP on WLC.I configured all as CISCO recommends, Authentication is passed well via LDAP - there is popup that Login Succesful. IP from DHCP correct.But no browsing - no any page opening.WAN DNS i...
Hi
1. copy from tftp server to flash.
2. next command: boot system flash:// (here write your new image).
3. if something wrong: just rewrite - boot system (to old image).
Here my config for: IPv6 multipoint GRE Tunnel over IPv4 DMVPN (as you pointed on topic).
I tested it and it working. I remove vrf it is not needed for DMVPN tunnel. And I also changed IPv6 addresses of tunnels and remove unnecessary commands, to be ...
Hi Kevin
As i know I can make tunnel IPv4 over IPv4 or IPv6 over IPv4 or IPv6 over IPv6
Here all three configured together. I would prefer to choose only one, at least, for troubleshooting.
But at first glance I did not see here the multicast map c...
