Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We're facing a problem with SPA 50x series phones. When a call is being answered by the 504 (in this example) the states displayed on the screen are:RingingAnsweringConnectedAnd the problem we're facing is the 'Answering' state tends to last about...
Hi,
The spa50x phones appear to ignore the 'InputFlags' on 'InputItem's in the XML browser. For example:
<CiscoIPPhoneInput>
<Title>Contact Edit</Title>
<URL>http://172.16.0.25/xml/directory/editsave.php?bugs=&mac=&contactid...
Hi,Think I may have found a bug in the SIP TCP...We've got a 504 and a 508 using SIP TCP. If they lose their internet connection (but not network connection, i.e. still has LAN access) for enough time, they fail to re-register (but think they are try...
Hi,Has anybody found the firmware for this phone? I've been shipped some on 7.4.4, and I can't even find the bin for that version online. I've had a few hangs on the phone so I was hoping to upgrade, or at least re-flash with the current version. I c...
Hi,Had a small incident with an SPA508G that has landed it in the "SOS Recovery Mode". It currently has the message on the screen and all 3 buttons at the bottom lit. All the recovery documentation says there should be flashing lights... I don't have...
Interesting! We've seen this a fair bit (if you lose sight of the network but the link stays up then it's quite reproducible). On firmware newer than 7.5.4 we can do it almost every time (we've stopped moving forwards with firmware until we could ide...
Pretty sure early SPA phones (like the 941) had an undocumented jumper inside that'd make it boot without loading the config. May be of use, although is entirely at your own risk..
That'll only be the FOSS stuff, unlikely to be that interesting. Just the usual kernel and busybox stuff. It is trivial to get shell access though, loads of injection potential in the web interface (including R/W access to the filesystem through a ni...
Nobody is helping because you've not given any information. Software versions and PSTN connectivity type are very important. It could be your carrier isn't allowing suppression of CLI, but without you telling us who the carrier is and how you connect...
