Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a chasis running VMware ESXi on 4 B200M2 blades and we are looking to add a B200M3 blade. Will I have any issues moving guests between the M2 and M3 blades?
I hate asking this question because I can do it across the entire LAN but not on a single switch:I have a 3750 24T switch with the IP Services image.I have 4 subnets I need to setup so all can talk to the other but it just ain't happening.vlan 400 1...
So I find out that all my problems with HIPS and Anyconnect are due to incompatibility between McAfee HIPS and Cisco. Has anyone else seen this? Is there a workaround? Running Windows 7 x64Have tried verions 3.0.x, 3.1.x of Anyconne...
First of all I want to say I don't think the 2960S Lan-Lite switches we have can help, but I figured I would tap in to the brain power of all here to make sure there isn't a solution I have over looked. We have a few hundred branch offices that are a...
I have to setup access for a support vendor that needs access to just a few IP addresses in my datacenter but all of my branch locations. In the LAN to LAN setup can I enter more than one IP and subnets?Thanks!Chad
I have started having issues with my 2960's and 802.1x as well. I am running IOS 12.2(52)SE. Sometimes a reboot or port restart works but lately that has stopped working. We are using the AnyConnect client as our supplicant with user/password to ACS ...
Thanks for the replies!Ip routing is on.I had port 23 & 24 setup as dot1q trunk ports, which may have been my problem, esx server is 10.110.1.10 and it would not ping while on the trunk. Switching to an access port fixed that. All other ports on swit...
