Does ASR9010 (RSP440/MOD-80) supports DWDM Optics? if does, what IOS-XR code components required? thanks,

Hi experts, I need the IOS-XR command equivalent to the IOS command 'ip default-network'.  In IOS, this command is used to set the candidate path for the gateway of last resort. #sh ip route ---snip--- Gateway of last resort is x.x.x.x to network ...

Hi Cisco Experts, BGP MED is non-transitive BGP attribute and the MED value learned from an eBGP peer will not be advertised to other eBGP peer, by default on IPv4. The question is, for MPLS VPN between two VRF sites with BGP is running as PC-CE pr...

Hi Experts, My company has OSR 7609 routers running with IOS 12.2(33)SRC3 code and i need to upgrade to SRE14, the latest code in that train. How can i check the configuration command change and any behaviral difference between the two code. After ...

Hello Experts, ASR1k IOS-XE are deployed as RR for IPv4/VPNv4 and it works great. But, recently we are looking into adding new RR function for L2VPN VPWS (BGP used for both Auto-discovery and Signaling, RFC 4761). The VPWS (BGP for both AD and Signal...