I have a C170 Ironport running version 8.0.1-023My existing LDAP query "(|(mail={a})(proxyAddresses=smtp:{a}))" works like a charm. I've attempted to change the query so that it can detect if the AD account is disabled. I've used this query as sugges...
Anyone know of a way of using CAD Chat feature between different teams? I think I know the answer, but just in case, I thought I'd ask. We have IPCC Express 4.0(3)
No, I remember at the time, that I tried all of those, but the query was never accepted. My solution was to do it at the Exchange server. If an account is located in "Disabled" OU, then the email is bounced to the originator.
There have been several...
Hi,Not in the manner I wanted, but I did find that setting a fixed IP from the voice VLAN on the phone made it work. Using DHCP was the problem. Still no permanent solution, but I don't have a lot of these and they move rarely. If I do move them, I j...
Yes - 18 locations, multiple routers/switches (all Cisco), same setup. All phones work fine, but this model of phone.I'm truly stumped. What's strange is if I change all of the VLAN settings on the port to be VLAN 100 and I specify the allowed VLANs ...
DHCP for VLAN 100 (voice) is served by the 3750 switch stack. We have a windows DHCP server for VLAN 2 (data). Both of them server up the TFTP server.The 8831 is showing the correct TFTP server address as well.
Ok, I tried this and no luck. Based on your suggestion, I changed the port to this configuration:interface FastEthernet0/25 description Workstations on VLAN2 - Phones on VLAN 100 switchport access vlan 2 switchport trunk encapsulation dot1q switchpor...