About shead1111

shead1111 · 03-26-2015

We have a need at this time for only one of our computers to allow 2 Windows users to connect to our network thru VPN (it's a work share situation, they will not both be logged on the same day). We happily use the old Cisco VPN client for everyone el...

shead1111 · 02-13-2014

There seems to be no 'save' to save the current running config - is that right? The docs say "For example, if you made changes to the current configuration but forgot to save it, after 24 hours, the device automatically saves the currently-running co...

shead1111 · 07-25-2013

I am confused about where to find any useful documentation on the Cisco site. I am caught in a loop when trying to find any command reference - pointing meto "IOS software" - is this what they mean ? Networking Software (IOS & NX-OS) - don't know wha...

shead1111 · 06-19-2013

Greetings all!The system light is flashing green which I understand means it's using the default IP 192.1681.254 currently.1. Do I Need to plug a computer directly into it to get at the webpage? Or do I simply need to use any computer on the LAN whic...

shead1111 · 03-27-2015

Thank you. I found this: http://www.cisco.com/c/en/us/td/docs/security/asa/asa72/configuration/guide/conf_gd/l2tp_ips.html#wp1041306Will this have any effect on the rest of the users? Step 1 Specify IPSec to use transport mode rather than tunnel mode...

shead1111 · 04-22-2014

Also have this problem with RV180w on Firefox and IE; Chrome was okay.

shead1111 · 04-22-2014

n/t (hijacked thread. Sorry)

shead1111 · 04-22-2014

UPDATE: The above was running 1.0.26. Still no change to the backup options in 1.0.4.14, at least not in AP mode.Re: signal strength - had 2 more units in - both at full 5 bars; so we're chalking that one up to a poor radio.

shead1111 · 07-31-2013

I can do sh run, but I get "invalid input..." at the pipe if I try adding | s user ior | i user to itI found what I needed in the short term... desperation ... too many hours searching online!!!In enable mode:View the list of users in show running-co...

Member Since	‎06-18-2013 08:57 AM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	17
Total Helpful Votes Received	5

User Statistics

User Activity

ASA500: migrate from Cisco VPN Client to native Windows VPN connection

Couple quick questions using RV180W as access point

Cisco 1900 series basic commands - user guide

200 series smart switch (SG200-18) access to web interface

Thank you.

Also have this problem with

Also issue with a new RV180w

UPDATE: The above was running

Cisco 1900 series basic commands - user guide