Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a production 7206 with 2 interfaces configured in a port channel to a 4510. I need to remove 1 side. What is the best way to take a link out of a 2 port port channel without stopping traffic on the other port?
Iv'e got a customer that we just updated the CME to 8.6 and CUE to 7.3. We have a remote phone working with AnyConnect and the ASA which we also upgraded to 9.1.The question is now they want several softphones for their laptops and desktops. They ha...
Opened up the CCNA voice Book and started studying. I found CCP in the book and doewnloaded it to my pc. It is only opening to half or 1/3 of the ie window. updated adobe no juice. Java? Have to run as administrator to get it to open. Any feedback...
Had an interesting thing happen, Tried to unlock a users phone and reset the pin Through the GUI and it would not work. (followled the PDF) I ended up having to have the user re-register to get into thier voicemail. Is this a common thing?
I've got a Data Center with an ASA5510, which has both a SSL tunnel for AnyConnect and an IPSec tunnel going to an ASA5505 at the Office in the outside interface.For remote users with ASA5505's I've got two tunnels built, one to the DC and one to the...
Thanks for the advice, that is what we thought, but when it happened it kicked us out of putty. So I have done more reading. We will try to fail over to the redundant pair and shut the port-channel down and remove it. One link doesn't really need a p...
The only place I found any CIPC config help was in the Call restriction area and had to do with a LPCOR. Having never configured a CME for any mobile or remote stuff, I have been floundering a bit. It cant be as simple as- ephone 281lpcor type mobil...
In our lab I have 2 routers with a T1-CSU/DSU card in them. To emulate a serial connection I made a T-1 Crossover cable. The pinning is different,but the 2 routers think they have a serial connection.Don't know if this will help, but...
Jorge and Barry,I checked my IE browser and was running 10 not 9. It updated at some point. (I unchecked that box) Anyway, I went to the tools menu bar, opened tools, clicked on compatibility view settings, added home (127.0.0.1), and closed IE. (whi...
Jorge,Followed your suggestions, still have no juice.Please post the link or the file for the 32 bit version of 2.6 you are using. Also my PC runs both 64 and 32 so if you have a CCP version 2.6 or 2.7 that will do 64 please post that as well.cisco-c...
