Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
I want to play an message before calls to cisco ip phone and to learn how to do this?
For example;
Calls come to CUCM ext: 4040
Aim is play an message to caller before 4040 ring.
Hi All, I am not sure is it possible to write a command list that works every Sunday to reset any ISDN PRI interface?İf it is possible please share with me. Thanks.
Hello,Basicly there are 3 phones when any one hang off ( up the headset) call will goes to other both phones automatically. When anyone answer the calls the ohter phones can answer by hang off and join the call automatically. There 3 phones just of c...
Cisco hardphone is able to get the tftp ip address from dhcp server by option 150 parameter. There is not any problem with the cisco ip phone( hardphone).For cisco ip communicator( softphone) should get tftp ip address from tftp server automatically...
Can I play a message for incoming calls prior to the phone ringing??
No, CUCM does not offer this feature. In order to do this, you would have a few options, as they require custom scripting, I will not cover them:
TCL script, if you have H.323 or SI...
Hi All,
I had same problem on my router (39XX - ssh enabled). I removed the below commend and router registered to CUCM.
command:
no ip domain name yourdomain.com
I have configured as below;
For example
I use 1908 as extension ( aim is say " your voice is recoded" before call goes to 1908.
Call comes from PSTN as 3331908 I sent this to Unity connection with ( CTI route point as 3331908).
I wrote a Forwarded R...
