Greetings to all,I had to have the mother board changed on my UCM 7.1.3 SUB this past weekend. Everything is up and running fine I am happy to report. After the dust had settled we discovered that we had not updated the iLo configuration. Since my re...
I know nothing more than to get to the point:Business need:1) I need to go to another company with some cohorts and work from that site for a while.2) There will be several laptops involved and a couple of printers.Technical need:1) I know that I can...
Hello to all, I am running CUCM 7.1.3 and have an H323 Gateway. I would like to know how I can display calling name on our 7965G and 7945G phones instead of the calling number (caller id). I have read and read and read and still am not clear...
Good morning all, I am preparing to run some single mode fiber in between some of our main office buildings. I need to connect a 4507 in one building to a 4510 in the other building. And in the same two buildings I need to connect a 9134 SAN...
Good afternoon all, First the housekeeping, I am running CUCM 7.1.3, Unity 7.0.2 and have 7965G phones for the most part. Now what I want to do. We have a Help Desk function with one number and a person maning the desk with a separate DN. I h...
Hello Avinash, What I was trying to say is the I have an Public IP address range that only has two IP addresses that can be used. There are four addresses of course. The first is the network, addresses 2 and 3 can be used, and address 4 is the br...
Avinash, First of all let me thank you for the quick reply. I appreciate it very much. I downloaded the document you sent and then went to another document that it pointed to on EzVPN with NEM on IOS Router with VPN 3000 Concentrator Configuratin...
