Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is there any way to forward an incoming call to an external number without tying up 2 lines for the duration of the call? The lines are all analog and PRI Centrex lines. Their current PBX system does this using a flash button the operator's console. ...
Is there any way to forward an incoming call to an external number without tying up 2 lines for the duration of the call? The lines are all analog and PRI Centrex lines. Their current PBX system does this using hook flash. I’ve looked up FXO hook-fla...
I'm getting the follwing error through RTMT[RTMT-ALERT-CCM-PUB-Cluster] SyslogSeverityMatchFoundAt Tue Oct 07 11:30:46 PDT 2008 on node 10.1.12.10, the following SyslogSeverityMatchFound events generated: SeverityMatch - Alert kernel: IpVms: No free ...
Does anybody know if AC can display caller-id name. When someone calls the phone from the outside, the phone will display "Company name" and number on the display. AC only shows the number and not the name.
I've found documents doing this from Analog phones connected to FXS ports on the gateway, which then connects to the CO on FXO ports but nothing for IP Phones. Hook Flash Relay on FXS/FXO Voice Portshttp://www.cisco.com/en/US/tech/tk1077/technologi...
