Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,
I'm trying to connect iphone jabber app v12.5 to cucm v8.6.2 in phone only mode without IM and Presence servers. The iphone is able to register to cucm, but when I make calls from the iphone jabber, I get a fastbusy when the remote ...
SIP phone --> CUCM --> cube -->ITSP
hello all, when making calls to the PSTN over a SIP trunk the PSTN user answers the call but phone connected to CUCM never recognizes that the PSTN user has answered the call. The phone connected to CUCM continue...
Hello,
I've successfully configured remote access to multiple internal subnets by using NAT0 statements between the remote subnet and the internal subnets. But I'm unable to determine the configuration that that is allowing access to our a storage...
Hello Cisco Friends, I have general question about the 871W and 871 Integrated Services Router. Can I upgrade my 871W with the same IOS image running on the 871 router? I've tried to the use the cisco software navigator but 871W is not a supported p...
Hello All,I am experiencing issues configuring WebVPN on a cisco 871W. Would someone be able to point out the problems in my configuration?Thanksaaa new-model!!aaa authentication login sslvpn localip domain name LAKEVIEW!!crypto pki trustpoint my-tr...
Erika you rock...!!!
I applied you solution to the router globally instead of to the dial-peer. Thank you...! You saved a headache...
config t
voice class sip-profiles 1 request ANY sdp-header Audio-Attribute modify "a=inactive" "a=send...
Hello Dennis, I'm guessing the default behavior of the Cube is flow through and I haven't changed the default configuration. My global comcast IP is NATT'ed to my internal 192.168.15.101.
Mohammed you are awesome...!!! That solved the initial problem. Should I add the rel command for all my dial-peers?
Now I have the problem that when PSTN phone try's to hang up the call, the phone attached to CUCM does not hangup.
thanks for your help everyone. Codec mismatch ended up resolving my issue. I added the line below to the dial-peer.
dial-peer voice 6600 voip codec g711ulaw
