Hi All, i have 2 issue with my Nexus 3548 1- when i insert GLC-SX-MMD into Nexus 3548P-10G port i got SFP vendor not supported if i check the interface however this is the original CISCO SFP and at the same port the 10G SFP+ from Cisco is w...
hi All, i have a question regarding 4500 i already have a Cisco WS-C4507R chassis with Supervisor II+ and i need to add another core switch WS-C4507R+E with Supervisor 7-LE to work in active active mode as VSS through the 2G uplinks on the bo...
Dear All, i have two router directly connected routers through 2 links ,the two router are using EIGRP and have a neighbor relationship on both links i redistribute the default route in R1 to router R2 ---------------...
Hi All Why i can ping 10.40.4.34 from pc if the gateway of PC is 10.10.10.24 and cant ping 10.40.4.34 if the gateway of PC is 10.10.10.10router 1 ip route 0.0.0.0 0.0.0.0 172.16.250.1router 2 ip route 10.111.233.0 255.255.255.0 172.16.250...
Hi All,Kindly i need to know if SPA525-G2 can work through ADSL connection to register to UC540 in the HQ and as i read it can do this function without need for another VPN router in the branch just an internet connection and the SPA525-G2 can do thi...
Thanks Jon and glen for ur add i found that VSS is available on Supervisor Engine 7-E, Supervisor Engine 7L-E and the classic 4507R only support Supervisor Engine 6-E, 6L-E, V-10GE, V, IV, II-Plus-10GE, II-Plusso the only way is to replace ...
Hi Cadet , Thanks for your considration kindly find attached P.S if i remove distribute-list 10 out BVI1 on R1the other static route appear on the R2 through both linksThanks again for yout time
@Jon Thanks alot for ur time n ur added here i agree with u and i disabled the ip default-gateway and activate the l3 feature on the switch and put efault static route and every think is fine now but till now i can't figure why it didn'...
