About serotonin888

serotonin888 · 11-24-2014

Hi - Is anyone aware of a method of monitoring the bandwidth utilisation on a dynamic interface on a WLC?I'd like to monitor the traffic on each dynamic interface to generate usage stats on centrally switched guest and employee SSID's.Thanks

serotonin888 · 11-15-2014

HiI'll be upgrading a HA pair of 5508's from 7.4.110.0 to 7.6.130.0. The documentation suggests that I just need to upgrade the active and this code is copied to the standby. Then simply reboot. After this verify that the active is not the standby HA...

serotonin888 · 11-15-2014

HiI have a stack of 2 x 3650 at the core and an access layer stack of 4 x 2960X.I was planning on linking these with 4 x 1GB copper connections. Any thoughts on how this should be cabled?I was thinking 1gb copper uplink from each of the 2960X stack m...

serotonin888 · 11-15-2014

Hi I noticed this feature is disabled by default.http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010000111.htmlAre there any issues in enabling it? Looks l...

serotonin888 · 10-28-2014

Hi Just wondered if anyone had noticed this with an upgrade to 7.6.130.0 and configuring HA SSO.Out of 44 AP's we had 6 that took a long time to join (2 hours). These were 1240 and 1130's. (I only noticed after the code upgrade and HA config)I tried ...

serotonin888 · 06-01-2015

I had exactly the same issue. Was advised to downgrade the WLC from 7.6 to 7.4. Install cert and then upgrade back to 7.6. But hardly ideal....

serotonin888 · 11-27-2014

Thanks for the reply - I'll look into get the info that way.

serotonin888 · 11-18-2014

Just following up after doing the upgrade. The FUS upgrade is copied to the standby automatically and applied when the HA pair is rebooted.Thanks

serotonin888 · 11-18-2014

Thanks - Based on all the feedback I'll probably use 2 gig links from the master (one to each of the 3650's) and then 2 from another switch in the 2960X stack (one to each of the 3650's) . I'll configure etherchannel with LACP active. The 2960X is ju...

serotonin888 · 11-18-2014

Thanks Jody - We'll be using stack modules in the 3650 and 2960X's (true stacking).

Member Since	‎12-30-2005 01:02 AM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	137
Total Helpful Votes Received	15

User Statistics

User Activity

Prime\SNMP Monitoring of dynamic interfaces

Upgrade WLC HA pair 7.4.110.0 to 7.6.130.0

Uplinks between switch stacks

CCX Radio Management

AP's very slow to join after HA config and upgrade to 7.6

I had exactly the same issue.

Thanks for the reply - I'll

Just following up after doing

Thanks - Based on all the

Thanks Jody - We'll be using