cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
402
Views
0
Helpful
2
Replies

Prime\SNMP Monitoring of dynamic interfaces

serotonin888
Level 1
Level 1

Hi - Is anyone aware of a method of monitoring the bandwidth utilisation on a dynamic interface on a WLC?

I'd like to monitor the traffic on each dynamic interface to generate usage stats on centrally switched guest and employee SSID's.


Thanks

1 Accepted Solution

Accepted Solutions

You have to get that stats from switch where you defined those SVI. WLC dynamic interface not terminate any L3 traffic  & switch SVI is the place to go.

If you have netflow monitoring or simple snmp monitoring tool, you can get that stats from the switch.

 

HTH

Rasika

**** Pls rate all useful responses ****

View solution in original post

2 Replies 2

You have to get that stats from switch where you defined those SVI. WLC dynamic interface not terminate any L3 traffic  & switch SVI is the place to go.

If you have netflow monitoring or simple snmp monitoring tool, you can get that stats from the switch.

 

HTH

Rasika

**** Pls rate all useful responses ****

Thanks for the reply - I'll look into get the info that way.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: