Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I have a Cisco C24 M3 server where I need to update the firmware. I downloaded the Cisco HUU for that server model, however it will not let me upgrade the firmware as its says “invalid platform”, which does not make sense as it’s the correct ...
Hi,we have setup iSCSI booting on a new B200 M3 blade that has a ViC 1240. When the blade boots up & goes through the iSCSI boot, the "first" iSCSI boot option ROM is successful, but the second one shows the "initialize error 1" error. when i look at...
Hi All,Is there is an issue if a UCS chassis 5108 has B200 blades with a mixture of CNA & ViC card? say some blades have M73KR & others have ViC1240.would this work? ThanksKass
Hi All, anyone come across a ql_ima.log file that fills up the /tmp folder on ESXi 5.5? we are running B200 M3 blades with Cisco ViC 1240. a quick search on the internet points to users having to update the qlogic driver to fix the issue. if we delet...
Hi All,just received 2 x 6296 FI's with 2208 IOM's with 12 cables. I though that there was a "order" on the cable config from the IOM to the FI's ? either 1,2,4,8 cables? is that correct or can I use 6 cables from each IOM? We currently have 4 blade...
ok, version 2 also comes up with the same error. this is at the point of booting up with the HUU CD. i dont even get to the stage where i am given the option to select the which components to upgrade. looks like a TAC case is needed.
Hi Wes, Thanks for the reply.the front of the server shows C24 M3L, i have attached a screenshot from the Cisco device coverage of the serial number and that also shows a C24. Thanks
Hi,
Thanks for the prompt response.
if i may ask, what was the software solution?
we have had Cisco Nexus 1000v setup with isolated pvLANS & got it working, but have had issues and so we wanted to move away from the 1000v to a VMware vDS.
Thanks
