About jjcollaguazo

jjcollaguazo · 04-01-2013

HIi All,Just wondering if anyone else has experineced isssues upgrading the IOS on a 921 router.i'm upgrading from:c1900-universalk9-mz.SPA.151-4.M4.bintoc1900-universalk9-mz.SPA.152-4.M3.And even after stating the boot system command i get the follo...

jjcollaguazo · 09-22-2012

Hi All,Hopping someone can help, I've setup an H323 GW in Seoul and all outbound ISDN calls work fine except international. I’ve attached the debug output of a successful and failed call (debug isdn q931), also debug voice ccapi inout.I've confirmed ...

jjcollaguazo · 02-10-2012

Hi All,I was hoping someone could point me in the right direction on how to create inter-cluster trunks? I'm assuming this would be the best was to make VOIP calls between my CME site and all other sites registered to CM?I know i can convert the CME ...

jjcollaguazo · 02-10-2012

Hi All,Just wondering if anyone has successfully made calls from an EX90 via the PSTN when registered to CM8.6? Video calls over the WAN to other EX90's work perfect.I've made sure the correct CSS is configured but still not able to make calls.The de...

jjcollaguazo · 12-21-2011

Hi Guys,I'll be deploying the new jabber client for a customer and i'm unsure of what QoS to configure on the switch ports for end users. Users will also have 7942 handsets, so if i configure auto qos voip cisco-phone, I doubt this will protect the v...

jjcollaguazo · 07-17-2013

Hi Simon,Thanks for letting me know about CTRL-Q that actually fixed the issues. i also noticed that by default SecureCRT Flow Control option RTS/CTS is ticked and works fine with a standard console cable connection, but caused issues with Airconsole...

jjcollaguazo · 07-11-2013

Hi Mate,Actually bought one of this recently and from all my test it look like a great option when working in a Datacentre. i actually have it setup with putty, i've had issues with SecureCRT, i can only see the output, but can't send data.i've email...

jjcollaguazo · 04-01-2013

Hi,Just to let everyone know, its seems that upgrading from usbflash1 corrupts the file somehow. I tried copying the IOS from my laptop to the usb drive several times. Before doing a safe remove of the USB drive i confirmed that the md5 hash was cor...

jjcollaguazo · 10-30-2012

Hi Roger,I made the suggested changes and sent a detailed email to the telco. After a couple of days the issue was magically fixed.Looks like the language barrier just complicated the issue unnecessarily.Thanks.Sent from Cisco Technical Support iPad ...

jjcollaguazo · 09-29-2012

Both your suggestions fixed the issues i was seeing, but still no successful call. Also tried the isdn map on the serial interface so the called number is recognised as International, but same result.Sep 29 19:30:26.326: ISDN Se0/0/0:15 Q931: Applyin...

Member Since	‎10-25-2010 10:46 PM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	60
Total Helpful Votes Received	10

User Statistics

User Activity

1921 IOS upgrade failing

Message on IP Phone - High Traffic, Try again later

SIP Trunk between CME and CM 6.1

PSTN Calls with EX90 Registered to CM8.6

Cisco Jabber Client - QoS Config

Air Console Reviews

Air Console Reviews

1921 IOS upgrade failing

Re: Message on IP Phone - High Traffic, Try again later

Re: Message on IP Phone - High Traffic, Try again later