Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We currently have a Lync Server 2013 configured and working.
Our company purchase Cisco Telepresence and we were told to have these DNS entries added by our ISP
A record:
Telepresence.gov - Public IP
SRV records:
All of the following records w...
I am using ISE 2.0 and have created a Policy to login to our ASA 5525X running ver 9.5.2 using SSH.
I can login into the ASA to user exec mode, then use enable and type on my password again to get into priv exec mode.
I would like to type in one use...
I have a C22 M3 with Vmware 5.5 running and a Cisco VIC 1225 card installed. I have recently updated all the firmware to 2.0.3i on the box through CIMC. I can see the Cisco VIC card installed and i have configured each port as a standard switch. i ...
we have our network separated into a northend and southend. each data center has two 4510R+E switches running VSS between them. we have both data center's connected with a port channel that connects to a 3750E switch. we would like to remove the p...
I am having an issue where internal numbers are not showing up on caller ID as their DiD and just the last four digits. I have looked at Translations and transformations configurations and examples. I tried to apply them and am not getting anywhere....
i have run into that issue with my deployment using certificate based authentication. i have had to use a non 802.1x port to get the certificate installed and then move to a 802.1x port to test. depending on what version of ISE you are running, ISE...
here are some step by step documentation that may help.
http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/115988-nps-wlc-config-000.html#anc11http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next...
AD:ExternalGroups EQUALS Junior Admins ) then Access-Accept-lvl-1 & cisco-av-pair = shell:priv-lvl=1you can try setting something like this up where the Junior guys are in their own AD group and get authorized with a different profile.
This only SRV record i can find that was added for Lync:
SRV record _sipfederationtls._tcp.DOMAIN.gov to the A record sip.DOMAIN.gov
TCP/5061 is the only open port coming from the outside in for push notifications.
when i added the SRV records...