I am setting up a site-to-site vpn tunnel and require nat for the local and remote side. The remote side will nat to 10.2.255.128/25 on their side before they reach our network, so i will only need to source-nat our servers through the tunnel to them...
my company is planning on upgrading our 7018's to 6.0(3) using issu w/ dual sups. I was reading through the upgrade guide (below) and the last step of the dual sup upgrade procedure says to reload both CMPs. What is the purpose of this, and is it nec...
we have two ASA5520 running in FT on asa803-k8 code. I am seeing the below connections in 'show conn' , i have never seen this format before, what does the 0.0.0.0 mean with the real ip next to it in paranthesis? we have other connections that look n...
what is suggested for a classic wism and wism2 environment? Can APs on the classic wism code fail-over to a wism2? is new code for the classic wism past 7.0.116.0 going to be released, or is the classic wism going to be end of lifed?
are we able to view past ATE events? I see links to ones from 2009 - 2010, however when i click on them logged on or off, it says " you do not have sufficient privileges to view this, please contact your administrator"
this is a dedicated VPN environment. So if this server has a packet here, it will definitley go out the VPN; we have another firewall/routing point downstream from this that would route internet traffic to a different place. cool. thanks for verifyin...