Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm working on configuring a new 4431 ISR to replace our 3845 router. Mistakenly there appears to not be enough PVDM channels to do what we used to do. On the old router we had 192 total channels, now just 128. On our current configuration we have...
We're looking to purchase a video wall for one of our larger conference rooms. I am just curious how the MCU is going to display on a video wall. I understand that a conference in the MCU is going to be one stream as opposed to separate streams. Howe...
We're having some numbers ported over to us and we'd like to verify that we are in fact receiving all of the numbers at our SIP gateway. Since we have been getting more and more activity on this router, I'm becoming more concerned about using certai...
We are in the process of changing our trunks in CCM to use SIP instead of H.323. With H.323 we were able to monitor total calls at the router level using SNMP. Apparently this is not so easy to do with SIP as I've tried a bunch of suggestions and h...
I noticed a new MobileVPN client was released yesterday. Although, I don't see an Android version included which I was hoping for. What are the plans for an Android release if any?
How did you get to that view?
So far in my testing, and what I can see from the graphs, we only ever use xcode. Even when I initiate a conference call, it just takes up 4 xcode of type pass-thru which seems to not even count against DSP Farm resourc...
How did you get to that screen in RTMT?
So far from what I can see using the graphs, it seems we never use the "Conference" portion of our DSP Farm. Even when I make a conference call and run "show sccp connections", I see 4 xcode show up, no confer...
I've tried to use the calculator, but the first question it asks is if what type of T1/E1 card you have. This router has none, which made me wonder if the DSP was even required. Although when I run the command it does show it's being used for xcode...
I dug back through some old e-mails, and it appears that this required a reboot and then started working correctly. Verify that all services are started up correctly after the reboot also.
