Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have numerous sites with an ISR1 onsite as the local site router connecting each location to our MPLS cloud and Internet. We started dropping local Internet services at these sites last Fall and were putting in a CheckPoint FW between the PE and o...
I'm trying to solve a client VPN issue and I'm using my home 871W as a test platform. I seem to have angered my crypto engine though and have been unable to use that router for this purpose. The error I'm getting is:003890: Jan 14 18:05:39.691 CST:...
I'm having trouble getting the internal HTTPS server to use AAA for authentication. I have a working AAA setup for VTY access using TACACS+ but I can't seem to get HTTPS to work.aaa new-modelaaa authentication login console noneaaa authentication lo...
Our SP, as will all other SPs, will soon fall under CALEA requirements for data traffic. I've been reading up on CALEA for a while now and am rather stumped. Every presentation I can shows the a "mediation device" in the heart of the CALEA solution...
I couldn't find a general hardware group so I'm posting here instead.Besides the use of slots 7 & 8 for Sups, is there any other backplane or power consideration for installing other SMs in a 7613? I'd like to physically rearrange the SMs in our new...
Several things come to mind. Have you tried enabling console logging and logging into the priority 1 switch to see what is actually happening during the power transition? Is the delay in the master re-election process where the secondary switch reali...
DTP is not supported on any Nexus platform. This extends to the FEXs as well. Hence the lack of 'switchport nonegotiate' commands on the Nexus interface-config CLI options. DTP is still supported on Catalyst switches so you should still disable it...
I agree. In retrospect I wish I'd never upgraded to IOS 15. It's been painful for the CPU utilization on all my switches. I'm not sure if I can role back to an older release now that the ASICs have been flashed. I'm opening a ticket on 15.0(2)SE ...
In my testing the bug in 15.0(2)SE is not just cosmetic. It also prevents you from getting the TDR results in some cases. All ports that I've attempted to run the TDR against that were in an up/up state resulted in a Pair Status of "Not Completed"....
Sorry, but this is an incorrect answer. The correct answer would be to enter "no setup express" into the global configuration. This feature dates back to at least 12.1(13)AY which was released in July of 2003.
