Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Working on a migration project , where on the top there are 2 ASA 5585-X and then 2 Nexus 7710, there are many 5 to 7 vrf will be on Nexus devices and vrf communication will be going to be via ASA devices and there are many routes in each vrf , my qu...
Dear All, Can someone please confirm me what do i required to create 10 IPSec site to site VPNs and 50 SSL Remote User VPN on Cisco 1900 or 2900 Series Router . I am unable to find how many site to site VPNs i can create on Ci...
Hello everyone,I have configured the Nexus speed at 1000 speed. SFP is GLC-T . As you can see below the SFP is model number GLC-T. It is supported on the Nexus 5549UP.Also set duplex to auto on interface but no luck,still getting not connected issue,...
How to configure router interface for two subnets on it , my ISP is providing data link and internet on same ethernet to me , data link local private IP address is my from head office to site office 10 km away from HO ,and internet subnet is public I...
Dear All , Can someone please provide me the solution as per my required with the best devices little confuse in selection,below is the details1: have 2 Wan ISP link want a Fail Over on it ,if any 1 of Wan link go down another link auto...
Hi guys , I was also facing the same problem but my Radius Server is Windows 2012 NPS and Radius clients are NX-OS and IOS , so there was a friendly name mistake.I recreate the Network policy with friendly name eg : DC_? and rest of t...
Yes as per Cisco release note , now vPC is supported on Nexus 3548 Release 6.0(2)A3(1)http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3548/sw/release_notes/602_A3_1/n3k_rel_notes_6_0_2_a3_1.html#pgfId-486160
Configuration looks fine except missing '-' between group name
hostname(config)# snmp-server user admin vpn group v3 auth sha letmein priv 3des cisco123
has to be like
hostname(config)# snmp-server user admin vpn-group v3 auth sha letmein priv ...
