Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
I configured one Cisco 8821 connected with EAP-TLS with SCEP for cert enrollment.
I have CUCM 12, 8821 with firmware sip8821.11-0-4SR1-13, one router for SCEP RA, one Microsoft CA and an ACS Cisco.
Everything works fine but I would like to ...
Hi to all,i have a problem with the status of presence in CUBAC Console. I see the "?" in the console (status ukendt)CUBAC, Build 9.0.1.126CUCM 9.1.1.20000-5CUP 9.1.1.10000-8I have already follow the config guide to add the User_Profile in the DB of ...
Hi to all,i have one WLC with several AP1231 2.4 GHz. Everything works fine with PC and 7921 in normal condition (last firmware release 1.4.3.4).But with 7921 there is a little problem: if i walk quicky along the warehouse and along lanes while i'm a...
Hi to all,my customer has one Call Manager 3.3 and we would like to upgrade it to CUCM 7.1.5 for now. We bought a new server and the ESW with UCSS for the upgrade, for 50 enhanced users and for 4 essential users.Cisco has associated UCSS to ESW with ...
Good Morning,I have a problem with the license NOK-SCCP-CCM-10= that I have purchased.In this envelope there is a CD (“Includes License and Warranty”) and a little paper entitled “Right to Use Notification” but I can’t find any code with 11 or 12 fi...
Here is the TAC final answer:"Even though directory lookups appear read-only, UDS performs backend write-related operations, such as:User cache updatesSession-related state updatesDevice/user association refreshes"So this is why UDS search didn't wor...
Hi @pwenger , I confirm same behavior from 14 to 15SU3a but for UDS search. the UDS contact search was fine but after the new relase installation on partition B, we had error 503 on UDS server connection. I think the status of "Upgrade in Progress " ...
Hi Daniel, Control Hub - Troubleshooting section you can see only the SIP call through CVI.MS has its troubleshooting dashboard per user and per meeting. You can try to start from that and see if it helps. Regards
