Hi!!!!! I have a cisco ASR 1001-x that works fine but in the front of the equipment I see that the Major led is ON and when I issue the command sh facility-alarm status: ASR_1001T#sh facility-alarm statusSystem Totals Critical: 0 Major: 1 Minor: 0...
Hi!!!! I have a customer that the last week buy a cisco ASR 1001X with AVC licence, the customer is very interesting about AVC because in this moment in their WAN access had a cisco 3945 and deploy NETFLOW to see the traffic that cross the router. My...
I have a UCS B with 4 blades and 2 FI at this moment I have configured everything trought de UCS MANAGER but when I try to configue UCS MANAGER integration with VCENTER and I get A ERROR Reconfigure vSphere Distributed Switch:Cannot complete a vSphe...
hi!!!!In this week I get 9 switchs WS-C3850-48F-S and I want to know how many switch I can put in stack? how many members can I have in stack?thanks a lot!!!
first you need to configure the switch port, for example if you only have one network segment for everything (cimc, os and VM) you can put the port like: switchport mode accesswitchport access vlan x or if you have ip address of differents segments f...
it´s no that simple remenber that If you change the bandwidth this could be worse because the bandwidth is used for QOS and other decisions on the routing process
you can try with offset-list, please read this
Use an offset-list on R4 to Modify the Composite Metric at R2
The Composite Metric on R2 can be modified using an offset-list on router R4. An offset-list value of 20 on R4 increases the Composite Metr...
