Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
SymptomsCisco Jabber MRA login fails from Android and iOSDiagnosis ++ Jabber for IOS 14.1.0 on IOS Version 15.3.1. When logging into Jabber, the app locks up when Loading Contacts. The app does not progress. There is no option to pull a problem ...
Hi,
i configure FAX-Server with CUCM 7.X
i stuck some where i have a problem when some one calling out side. it's connected but after 4 second it's hang out.
Internal it's working fine.
I configure two NON-GK trunk one for FAX-SERVER and one for Voic...
Hi All,I recently deployed SX20 in a costumer place.The problems starts when I make a call to a specific customer that have a Polycom HDX 7000. When I make a call SX20 to Polycom HDX 7000, I can hear only no video is there. Regard'sArun Prakash Sharm...
Hello All, Can somebody please confirm is it possible to register the Cisco IP Phone CP-9971 on a Cisco VCS control server directly. If possible , I appreciate any guide or document for that. I have a VCS control on X7.0.2 .Please guys suggest me som...
Got the below update from Cisco TAC:-++++++++++++++++++++++++++++++++++++++++++++++++++++They have approved version 14.1.1 for deployment.It has been handed off to the Apple Store and the Google Play Store for Android. Once the respective companies a...
Try to use below command and create a Route Pattern in CUCM for CME and point to SIP trunk or ICT. voice service voipallow-connections h323 to h323allow-connections h323 to sipallow-connections sip to h323allow-connections sip to sip!voice class cod...
Dear, how to add the IP phone?ANS= Go to Device ---> Phone ---> Add New ---> Select Phone Type (Model) ---> Click on Next Give below information:1. MAC Address2. Description 3. Device Pool4. Phone Button Template5. SIP Profile6. Device Security Profi...
Dear Adam, You need to contact the TAC licensing team.And also please refer below link.++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++http://www.cisco.com/c/en/us/support/docs/cloud-systems-management/prime-license-manager-105/118836-con...
You need to check with Provider, because some time it is ISP Issue. Connect FXO cable direct to VG without modem. And also try below command also. Please try this with VG on global Command.VG-HQ1#Conf tVG-HQ1(config)#voice rtp send-recvVG-HQ1(config)...
