Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everyone!
I configured a 3rd-party SIP device on CUCM and was able to make audio calls to CSF devices, but video calls are not working. From SIP traces, I found the below scenario:
1 - Invite from 3rd party to CUCM contain video attributes.2 - ...
Hello all,
We started having issues with outbound calls with a SIP provider. This below is the call flow:
CUCM -> SIP Trunk -> Voice gateway -> SIP Trunk -> Provider
On the voice gateway, I'm getting a disconnect cause=47. Viewing the logs, it seems ...
Hello everyone,
I'm configuring an IVR on UCCX that has a menu to dial the digit for the option the customer wants to talk to.
When calling from an extension registered on CUCM, the option is selected and forwards the call as I configured on the scr...
Hello,
I'm working with a C1101-4PLTEP router and trying to bring the Cellular interface UP, but there are some issues.
The SIM cards are working on a mobile phone. On the router, they were removed and inserted again.
Some logs I've been running into...
Hello,
One of my clients had a power outage that caused CUCM, IM&P and UCCX to restart.
After this, users are unable to login to IP Phone Agent using IP Communicator.
They receive a message stating that the user is already logged in, and there are 2 ...
I saw this post before and tried to add sip-kpml to the dial-peer, but the router didn't accept the command.
It was solved changing dial-peer to dtmf-relay rtp-nte and OOB and RFC2833 on CUCM.
There's a dial peer between CUCM and gateway, that shows as incoming dial-peer on the logs: Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=105
Those SIP messages are also between CUCM and GW. I can see that outgoing dial-peer gets sel...
Yes, the SIM cards are installed. We're in Brazil, so first one provider is Vivo, and second one is TIM.
The router doesn't accept this commands under interface Cellular:
lte modem link-recovery rssi onset-threshold -110 lte modem link-recovery monit...
