Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, On our DHCP server I can see a device that is plugged into VLAN 70 that is non corporate device as it says it's an android device. I've gone onto our Cisco 2960x stack and ran the 'show arp' command and it only show the management IPs. The Cis...
Hello, We have been using the Cisco AnyConnect client for sometime now in a split tunnel setup. We have been asks to install the standalone Umbrella Roaming Client by our parent company and it works fine internally on the LAN, but when users are on ...
Hello, I've been asked to add 2 new SSIDs and tie them to 1 new VLAN. I see I will need to add this to the trunk ports to the various switches we have leading to the WLC. How ever what do I do on this screen?The WLC connects to a Cisco Nexus switch w...
Hello, It's been over a year since I upgraded out 2 x WLCs (active/standby). They are 2 x 5508's. These is what we have: Last time I had to upgrade because we were have client drops and has been very stable since. I believe I just have to upload the...
Hi, I've not upgraded our ASAs in a while and need some help doing this. We have 2 x ASA 5516s with Firepower and they are in an Active/Standby setup. Here are some details: I have a TFTP server, but am not sure which firmware to go to, I have done...
Hello, I do have that button to add a new interface. Oh and we use APs FlexConnect mode. So for example would I create a new SSID called "Cisco" give it a VLAN tag of say 99 then go to the interfaces and add a new interface for VLAN99 and add to my ...
Firmware downloaded and not uploading to switch I guess I just use the boot image command? I see this in the config: archivelog configlogging enablelogging size 200notify syslog contenttype plaintexthidekeyspath flash:/$t-$h-configwrite-memorytime-pe...
Thanks that worked. Just doing another switch and it's flash has lots config files, I guess because of crashes, but I'm not sure. See photo. Also the firmware seems to be an EX3 file what is this?
Regarding the "subnet" below this is the VPN pool subnet?
object network OBJ-AnyconnectIPs subnet x.x.x.x x.x.x.x nat (outside,outside) dynamic interface