Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a 2901 with all 4 modules populated:- Module 0,1 ==> EHWIC-D-8ESG-P (8 port Gig switch PoE)- Module 2 ==> EHWIC-1GE-SFP-CU (1Gbps WAN)- Module 3 ==> HWIC-4ESW (4 port FE switch) 2901 has normal non-PoE power , interestingly when running,...
Hi, I have a very strange issue , Vedge is registered on Vmanage as below (Only CLI at this stage and no template) I have configured ntp on the vedge and vedge has also internet access but cannot synch(time cannot be manually set too) Anybody faced...
Hi, I have a very strange issue which have spent lots of time and can't find any reason for it. Got a 2901 with below modules:1) NAME: "4 Port FE Switch on Slot 0 SubSlot 0", DESCR: "4 Port FE Switch"PID: HWIC-4ESW , VID: VN/A, SN: 2) NAME: "WIC/VIC/...
Hi, I have configured anyconnect on IOS and working perfectly fine , my policy is as below:!Policy group Panzer-SSLfunctions svc-enabledsvc address-pool "SSL-VPN" netmask 255.255.255.0svc split include 10.0.0.0 255.255.255.0default-group-policy Panze...
Hi, Thanks for coming back , pls check below: It doesn't show the FE interfaces , I checked the logs but no logs in respect to the FE module.Will do a cold power and revert. Thanks
@Flavio Miranda wrote:Hi You have configured ntp on vEdge but they are able to reach the NTP server? Looks like not. -If I helped you somehow, please, rate it as useful.- Hi Flavio,I have already put a screenshot of Vedge pinging the NTP server.The...
Tested it Mikael (yourself) were right , have to cable like a VDC (burn a port from each switch module and physically cable them). Ports are autosensing , no crossover needed. Turned spanning tree off and works perfectly. It's one of the things neve...
