I have a customer that wishes to fully mesh a 30 site IPX network using the existing L3VPN infrastructure . We intend to encapsulate the IPX within a GRE tunnel BUT can I peer all 30 sites to a "core" VPN router and have this router foward IPX packet...
I have a customer that wishes to permit access from subnet 172.30.0.0 255.254.0.0 on the 3rd_party segment to a web server 192.168.1.121 on the DMZ segment . The customers applications have a destination IP address of 192.168.254.13 and we have confi...
I'm struggling with the alphabet soup that is 802.1x authentication ! Which method (LEAP , EAP , PEAP EAP-TLS ) can I configure on the 350 ?Many thanks for your help..Mike
Hi..I have a legacy DDR router that is running OSPF and this is required to redistribute its static routes to a local WAN BGP router.When we fail a remote WAN link to DDR initiates a call and so far so good.When we re-establish the remote WAN link th...
Hi Russ, Think I have come up witha work around..Have created a distribute list with OSPF on the core WAN router that denies the LAN subnets of the remote routers so the only way the core can learn of a route is via BGP..Tested it last night a...
NO...When we re-connect the remote WAN that router correctly learns all its routes via BGP but the core WAN router still has the best route via the static DDR router and NOT via BGP .To get round this we delete the static and then the core WAN router...
Hi Russ and thanks for responding..Yes you have correctly summarised the problem..We drop a remote WAN link so the PRI router uses its static to reach the remote network.We re-establish the remote WAN link but the CORE VPN router running BGP never up...
Hi Roger, I don't think the issue is with DDR but more towards the way BGP selects its best route..When the remote WAN link comes back up the core router should learn of the new route with a better AD via BGP but it never does and always uses...
Sorry..Just re-read your post and you state it is a Router ! This URL has all the info you require and I used this IOS last year and it worked a treat !http://www.cisco.com/en/US/products/sw/iosswrel/ps5012/products_feature_guide09186a00800ed370.html...
