Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
My DNS-O-Matic is not working. I have what I think should be the correct URL string for it. Every time I try to post it here, the blog keeps screaming there is something wrong with the http code and rejects posting my message. I know there is some...
I am not able to escape from the switch module in our C3945 router using the Alt-Shift-6, x function.
When I 'Alt-Shift-6' and hit the 'x' key, nothing happens.
I had used the 'service-module' command to reach the unit some time back.
When I...
We took a power surge. I tried to get our C3945 back online. It kept rebooting over and over again. It did not seem to be able to read the IOS file.
I formatted the memory and copied the IOS from the external thumb drive to the flash...
I have a Cisco Nexus 3000 series switch connected to another manufacturer's device. Port Ethernet 1/1 is configured to be in trunking mode. But I am getting a 'IP is disabled on Ethernet 1/1' message from the console port. Additionally, the device...
SpoilerI see that I never posted what the resolution was on this issue. Turns out that the flash drive was corrupted. To solve it, the flash drive had to be formatted as FAT32 and the IOS copied onto it. Once we did that, everything was normal aga...
I connected another PC to the console port.
I was able to log in. I attempted to execute the 'Ctrl-Shift-6' command followed by the 'X'.
There was no response. I was still in the twenty-four port card.
I did a 'show sessio...
Thanks for the reply.
You are correct. I tried both Alt-Shift-6 and Ctrl-Shift-6 and then 'x'. But it still will not let me return to the prompt of the C3945.
I should qualify that I am connected through the console port.
...
I am missing something here.
I want to stop level 3 users from using the telnet and ssh commands. I don't want them tying up the serial interface to telnet or SSH to other places out on the Internet (we telnet to a serial device that allows us to...
I tried connecting the IOS trunk port to the Nexus trunk port directly.
I am still getting the same message.
It has got to be some configuration setting on the Nexus.
Any suggestions?
That error message shows up every time I type 'show ip int e1/...
