Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Im having a small problem with my ACS server.All authentication is working fine, but when i goto "Reports" and check the logged in users, there are none. Also, I know that users are on the Wireless Network. When we had our VxWorks enviorment, the ACS...
I have a moderately sized network consisting of 3550 and 2950 series switches. I want to set up a RSPAN session on the switches that will redirect specific VLANS to the RSPAN Vlan.Well reading through documentation I found that on my 2950 I can set u...
Today, (Sep 1) the WiFi Alliance gave it press release for WPA2. Them gave mention that Cisco 1200 Series Access Points with integrated 802.11a and 802.11g radios will have wpa2 support. Does that include the 802.11b only Access Points?Also, what cod...
Hey Wifi Guru's-I have a question about setting up WDS.In the latest code rev 12(15)JA, you can set the Access Points to do "Specified Discovery" this allows you to use a WDS anywhere on the network, no matter if it is in your subnet or not. Here is ...
Hello Wireless ExpertsIm in a bind. I need WDS to realy use the full functionality of my WLSE. I CANT afford the wlsm, and need to support more than 60 AP's on a single subnet. I merely need WDS for the Radio Management portion, and have no plans for...
I got the chance to use a snort based appliacne by "sourcefire" and was pretty impresed by it. I have a few cisco ids appliances currently, and while i liked the familiar interface of the cisco, the snort based device was very verbose. The sourcefir...
I have though of a way to do this as well, and this is what i have come up with.You need 3 vlans1 vlan will be open with no wep and broadcasting the ssid. This will allow anyone to connect. On this vlan have a DHCP and DNS server. Then, im not exact...
I have some 1200 APs that are B onlyIf I wanted to be upgrading to G, I would remove the internal B radio and replace with a combination B/G card? The 1200 AP's then have 2 removeable radio interfaces?
Well, I have been using the Aironet 1200 AP's for a while now, and while I dont have any B/G models, I can say this, the interface "Dot11Radio1" is not necessarly an A radio, the Dot11Radio1 interface is simply the modular radio on the 1200 Access Po...
If you want to get TAC support, then youd better only have 60 APs per WDS, that means 2 management VLANS for that 100APs.Right now i have like 40 APs on a non-Dedicated, with little client traffic, and its ok. If you dont need TAC, then id say that w...
