Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
we upgraded our fabric last weekend, everything works fine but we have noticed these days that 4 servers that are in a BD (level3) which has the same subnet definition that an l3out, are not reachable if the traffic flows through that l3out....
Hello all,
I am facing this issue in my client.
In business hours, every 30 minutes, the CPU increases to 99%-100% due to ARP Input process. Initially, it was the ARP snoop process, but we disable "ip device tracking" functionality from all the i...
Hello all,
I am facing this issue in one of our 6513 switches:
Nov 2 16:00:23: %SYS-2-MALLOCFAIL: Memory allocation of 308 bytes failed from 0x407958B4, alignment 32 Pool: I/O Free: 37184 Cause: Memory fragmentation Alternate Pool: None Free:...
Hello all,
I installed Cisco Anyconnect with the NAM module in different PCs in order to sent both, client and machine authentication to an ISE, and everything works fine.
But in other corporate PCs, when the installation is finished, there is a mess...
Hello everybody, I have a question regading to the compatibility of the Cisco Catalyst 3650 version 03.07.01.E with the Aironet 2700i device. In the compatibility matrix it shown that the properly version is 15.3.3 JNB but there is not this software ...
Hello,
it seems that the TAC have found a bug related to this. I am going to collect some logs tomorrow afternoon, I will tell you what they say to me.
In the mean time, I explain the situation a little bit and the workaround, we luckily found.
The d...
Hello Reza,
here is the configuration:
- Global:
aaa group server radius ISE server 10.10.10.1 auth-port 1812 acct-port 1813 server 10.10.10.2 auth-port 1812 acct-port 1813aaa authentication dot1x default group ISEaaa authorization config-command...
Thank you Leo!
As you said, the reboot of the chassis is a temporary solution.
What version of IOS do you recommend?
The supervisor used is Supervisor Engine 32 and the IOS version 122-33.SXJ10.
The only solution I can see is to upgrade to th...
Thank you Mark.
The person who manage the switch gave me the "sh tech" file and I think there is something related with the I/O Pool but I can not give a proper answer seeing this:
--------- show buffers --------Buffer elements: 500 in free l...
Ok, thanks.But, what I am referring to are the VMware vSphere ESXi licenses that are required to install Cisco Unified Workforce Optimization in the BE6000.Is it enough with the Cisco UC Virtualization Hypervisor?Thanks again.
