Hi Martin, Yes, the LED port indicator was still active when the cable is unplugged and even show po...

Hi Martin, Yes, both TenGigabitEthernet1/0/3 & TenGigabitEthernet1/0/4 are part of LAG, both of this...

Hi Sujoy Paria, Yes, I had tested with 'shutdown' and 'no shutdown' on the interface but still no lu...

Hi all, I am facing one issue on the Cisco Small Business SG Switch Model (SG350X-24MP-K9-UK) that t...

Hi all, I would like to seek for some advice on the issue that faced on uplink ports (TengigabitEthe...

Hi, Thanks for your advice while disable IPDT will not impacting any spanning-tree or network issue ...

Hi, Thank you for your reply while the issue was happened around 2 minutes and network had back to n...

Hi all, I have one inquiries regarding on the MAC Flapping error as shown below. Switch Model = WS-C...

Hi all, I would like seek for some advice on the Cisco Expressway-E with version X8.8 to disable TLS...

Hi, I am currently facing some issue on the FMC GUI from SourceFire 3D unable to prompt which had te...

Hi, As suggested, I had upgrade to the version ce 8.3.7 but unfortunately the problem was still pers...

Hi, Thank you for your reply and advice while I am planning to upgrade the firmware to CE8.3.7 to ch...

Hi, I have no idea because this unit had been deployed few years back. I had tried with other browse...