Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have 5 of Cisco phones (3x 7941, 1x7961, 1x7960) connected to a cisco 2811 with CME 4.0A phone (7941) has problems:1- when a call arrives, phone rings, as I pick up the handset, none conversation occureres, the receiver doesn't listen nothing; the...
With this model I can't use the ADSL connection because the atm interface don't change your state to up.With debug atm events output is:*Mar 3 05:26:01.117: DSL: Send ADSL_OPEN command.*Mar 3 05:26:01.117: DSL(ATM0): Using subfunction 0x0*Mar 3 05...
Hi, I have a router 1760 with a ADSL interface. Sometime, without any reason, it stop to work. I see that the problem is NAT, because, when I do debug ip nat the message console is:NAT: translation failed (A), dropping packetIf I reload it, the route...
I installed two br350.Every 18 minutes (circa) the link go down.Log from non-root "Lost authentication with parent"then "Deauthenticating [root bridge], reason "not autenticated"then "Associated to Parent"This loop go away for 7-10 times, then the li...
version 12.0service timestamps debug uptimeservice timestamps log uptimeservice password-encryption!hostname xxxxxxxxx!enable secret xxxxxxxxx!ip subnet-zerono ip domain-lookup!isdn switch-type basic-net3!!!interface BRI0 ip address negotiated no ip ...
I see two way:1- If you can, assign a public IP address at the 3621's interface that term vpn.2- If the first solution it's impossible, you can do a static nat between the ip address of the 3621's outside interface and a public IP address on your lin...
