Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Fellow netpro members,I need help in a specific configuration for something I have trouble getting operational.We (my company) use a DMVPN dual hub configuration with EIGRP routing protocol running over the hub and spoke tunnels (and with dial backup...
All,I am implementing QoS on our MPLS network. Our environment exists of a mix of Cisco 3750 and 3560 switches. The IPT system is Avaya CM with Avaya phones.The WAN network is a MPLS network.Ports are configured for access and voice vlan (no trunking...
Hi,Project roll out question here. We have an existing environment with 4400 series controller and 1130 LAPs. To provide Internet access for guests we have a guest wifi that hands of traffic in one of our datacenters. Since usage is rapidly growing w...
Hi,I am planning on making our small offic vpn solution more redundant by adding a second hub router to our DMVPN solution. There are about 100 spoke routers, and there will be 2 hub routers, both located in one of our datacenters.I have some questio...
Hi,Just to verify my current thinking. If I have two catalyst 6500s with supervisor engine (PFC2/MSFC2) with a Gigabit Etherchannel between them, and all access switches connecting to both switches, or cascaded (where the first and last connect to th...
Indeed Avaya phones do not use CDP. You have three options with Avaya phones and Cisco switches.1. configure trunks like you mentioned2. use LLDP3. configuire port for switch access vlan and voice vlan and have the Avaya phones learn the voice vlan...
If your WLCs are in one mobility-group, and an AP keeps associating with another WLC then the one that is primarily or secondarily configured, that could indicate packet loss between your AP and your WLC (#004).There is no other reason for an AP to h...
Considering the fact that you see connections break while not matching the timer and only on SSID with foreign anchors, I get the sense that this is not related to idle or user related timers, but rather a mismatch between your anchor Hello timers.Pl...
Hi,I'm currently deploying Blackberries on my Wifi networks. T-Mobile has a feature called UMA which enables seamless roaming between WiFi and Cellular network, as long as the user is in the US. Outide the US the T-mobile Blackberry still uses the Wi...
