Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
I can see in release 8.4 that the AP1562E don't support the FLEX + MESH.
Can you tell me if the FLEX + MESH is supported en release version 8.5 or 8.6 ?
Thanks
Hi,Is there anyone who could give me the hardware limit on the maximum number of HSRP group that you can use simultaneously on a Catalyst 4500-x?Is it 256 ?If someone can do the test? Unfortunately I don't have a 4500-x to make the testRegards.
Hello,Actualy I have a customer to use a lot of vlan in his network (140).Let me explaine the problem:On 2960 catalyst switches, it can have a maximum of 255 vlan in the vlan database (OK) but only 128 spanning-tree instance (NOK)When i use more than...
Hi Ric,
Thanks for your reply.
You are right paint the AP1572 will void the warranty. The workaround will be cover the AP with Oberon or Panduit equipement.
Regards
Hervé
Hi,
Thanks for your reply.
You are right, paint the AP1572 will void the warranty. The workaround will be cover the AP with Oberon or Panduit equipement.
Regards
Hervé
Hi,Thank you for your answers, but I am not sure because I had test these commands on a 3750X and I also <0-255> group number.example:3750x(config-if)#standby ? <0-255> group number authentication Authentication delay HSRP initi...
Yes all switches failed to get the vlan.dat.The success are only for the PIX, ASA, Router but he don"t have vlan.dat.Please find the output file.ThanksHerve
