THere are reports of poor audio at this site on Polycom VOIP phone.QOS appears to be setup correctly using LLQ.When I look at the service-policy output on serial, it seems to indicate there is CS5 traffic in the default-queue, but nearly no packets i...

CUCM 8.5Has anyone found a way to move a large number of translation patterns from partition A  to partition B , using a BULK edit method ?BULK tool seems to only allow edit to users, phones, lines.  THe only method we found was to EXPORT all trans p...

UNity conn 8.5, been having issues with some nodes not completing replication, due to errors, so trying to determine if this message is normal, or an error.  The USN sent = USN ACK in both cluster 1 and 3, I see these messages that make it appear tha...

    Running 8.5.   Replication seems to be in sync at the time, the voice network map shows no RED. The USN Sent = USN ACK, so looks good there.   Now we are seeing a few of these errors, what do they mean ?  Is it jsut that there is no recording the...

CUCM 6.1.5 with 8 subs, 1 Pub, and MOH server running on TFTP server using fixed source WAV files.  2 phones in the device-pool, when called by PSTN offf-net callers, and put on hold, the caller hears no MOH, only silence.  Other phones in the same d...