Remote location there is only one cisco 9951 IPphone,after changing gateway model is 2900 and its version is 15.2
phone is going to unregister mode ,our call manager showing "unknown" state
manual configuration ip phone setup
dhcp :disable"
we are c...
Remote location Cisco IPphone(9951) Showing "unknown" status
we have only one ip phone there,All the configuration is no problem for gateway and switch
We are try to all the possiblity
finaly Factory reset the ip phone but no chane occur,chande the ...
haii,,,,
We are facing Alphanumeric Caller ID issue for analog line,
user get the incoming call its displaying alphanumeric eg:6534YV376,,,
Call flow:::::: IPPhone or Third PArty SIp Phone>>sip>>CUCM >>Sip>>VOICE GW (pri)>>Service provide
How can...
haii,,,,
We are facing Alphanumeric Caller ID issue for analog line,we are open this issue Cisco TAC but not solved
when analog line get incoming call to analog line "Caller ID showing(number and name) both are mixed"
Call flow:::::: IPPhone or Thi...
now phone is registered....change the gw configuration...replace the old configuration ! .....why it happent?
why phone not register new configuration.?
Hello Devils
thnks for valuable time,,,,,,,,,,,,,,,,
1,Is there any sort of firewall which may be blocking TFTP traffic between the Phone and the TFTP server?
it is not find out right now,,,can u plz assist how it do????
i thing it may blocking (its ...
DHCP is Disabale, its not configured our CM ,
we are given the static configuration of all the ip phone
DHCP already setup the network team it is perfect ,
Remaining all the phone are working fine,only for one phone got problem
Phone status "unkno...
thanks for ur valuable moment
We cannot use the wirshark software collect the packet capure from switch port,bz we are working bank envorment ,its not allowded
can you plase help the another possiblility