Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
One of the best practice for sysadmins is to know which user now connected to which switches and before it that user connected to where.its good when you wont block MAC Address to move here ports or switches but you want to know when a user move he...
Link State Tracking is feature in CISCO Switches we can use it to improve servers or another network devices connectivity reliability.what is Link State Tracking ? when this feature is enable on your switches(in standard plan, in access layer switche...
what is DHCP Snooping ? as its name is very cleared what is that, its an mechanism to control your network DHCP Servers, in the DHCP Snooping we define DHCP Server connected to which port or VLAN and then after enable DHCP Snooping, if Switch rec...
Maybe its occurred for your network switches, for your security of switches or Access Layer security, after enabling port security and MAC Address filtering, we want to add another Client or workstation or replace another workstation to the oldest ...
Hi Everyone at this Article we want to talk about very commonly project in network security section, and today's Network security is bolder than old, and we see some article about Security but they have only some theoretical info, in this Article we ...
Refer to CISCO description:IP Telephony Support-Features and BenefitsThe Cisco 2800 Series allows network managers to provide scalable analog and digital telephony without investing in a one-time solution (refer to Table 4 for more detail), allowing ...
yep that right you must your network in routing, and one thing you must know about project like this, Connected network doesn't need any route.when you set IP in your interfaces, Router add Routes Automatically in your Routing Table as a connected(yo...
Up to 300m link lengths are possible when using 2000 MHz/km MMF (OM3). Up to 400m link lengths are possible when using 4700MHz*km MMF (OM4).https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/10-gigabit-modules/product_data_sheet0900...
