Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have 2 Nexus 5548's. We have a trunked peer link between with only certain vlan's between them. My understanding is that if we change that and add a vlan to the peer link trunk it will cause a brief outage. Am I wrong in my understanding?
I have setup my radius server access on the Nexus but am unable to authenticate through putty. If I do a radius-server test on the Nexus it says I authenticate. Here is the log I am getting. I would appreciate any help.2012 Mar 14 16:03:21 switch-a %...
We have multiple site to site VPN's. I have a need that involves 2 of them adding a 2nd VPN between them. The basics of this is our corporate office is site A and then 2 of our remote locations will be site B and C.Site A has a VPN setup and working ...
Site A is actually an Adtran router so none of it is using the EasyVPN. I noticed that too for the UC520. I am working on the ACL's now to get them how I want them to see if this works.
The WAN interfaces for the remote sites (sites B and C) can ping each other directly without coming to the corporate office (site A). I will try messing with the ACL's but with the tunnel not even trying to be created could that really be the issue?
Here is the 2 access list for site B ip access-list extended VPN-siteCpermit ip 10.10.30.0 0.0.0.255 anypermit ip 10.11.30.0 0.0.0.255 anypermit ip 10.12.30.0 0.0.0.255 anypermit ip 10.13.30.0 0.0.0.255 anyip access-list extended VPN-listpermit ip 10...
Can I ask how you got it working? I am having the same issue with my company wanting a direct VPN between 2 sites that both already come back to the main office here.
