Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Expertwe have 3 Equinix sites witch we are using EQX fabric to connect to our cloud infra already, and we have some bandwidth left and we would like to make use the remaining bandwidth to build a custom MPLS network across 3 sites to aim to pro...
Hello expertsI have facing a problem on the redistribution backgroundin my company mainly EIGRP, but recently we have 1 site setup VXLAN, so some of the Eigrp router they need to exchange the route will becomes EIGRP---> BGP ---> EIGRP but seems th...
Hello experts, I am starting to implement QoS on mGre tunnelsand I learned QoS on mGre Tunnel are slightly different than others since that is logicalin DMVPN it is something so-called QoS per tunnel. refer the link https://www.cisco.com/c/en/us/td/...
have a question regarding the QoS bandwidth for the DMVPN /mGRE interfacesimple configuration interface GigabitEthernet0/0/0description ISP_FACINGbandwidth 100000!-------------------------------interface Tunnel11description PRIMARY_TUNNELbandwidth 10...
Hello my friends I am pretty new to 4G card connection, recently we get a module NIM-4G-LTE-GA, put a sim card and google some basic setup from internet/cisco, and it works, we even made that works with the TCL script with SMS control too. after the...
Yes trueWith my experience for the upgrade that still buggy still load of wather mark error on the log,Also we have already moved to N9K already, VPC with layer 3 works well,Back to this topic, if any one wants to update that , do not expected ISSU w...
Hi Ti WangI haven't tried the latest code, but I remember that is more related with the H/W, end up I have no choice to setup the firewall policy to allow such control traffic running over my data plate.
If you reboot one by one, then you can retain some of the line card operating in one chassisI was reboot one by one, but found that the up time is really long, , after the switch is up, then it will check all line card one by one, also UPGRADE them O...
