Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Expertwe have 3 Equinix sites witch we are using EQX fabric to connect to our cloud infra already, and we have some bandwidth left and we would like to make use the remaining bandwidth to build a custom MPLS network across 3 sites to aim to pro...
Hello expertsI have facing a problem on the redistribution backgroundin my company mainly EIGRP, but recently we have 1 site setup VXLAN, so some of the Eigrp router they need to exchange the route will becomes EIGRP---> BGP ---> EIGRP but seems th...
Hello Expertswe are new to DCNM and also using DCNM to building a new VXLAN with nexus 9Kwe need to have a use case to create HSRP on the SVI, since DCNM not allowed us to do freedom config in NETWORKS, I tried to apply like normal like below, howeve...
Hello Experts, our company just get the nexus for vxlan and also with DCNM 11.3, we are totally new to DCNM, and we create some VXLAN and network looking good. but I have one wrongly configured VPC port-channel and that is jammed and I cannot DELETE ...
I am building a VXLAN environment using 9ks and configuring MP-BGP EVPN for my new Datacenter for relocation. The VXLAN side in theory everything looking good. However, I have the issue of -- how "overlay" connection with my existing office running ...
Yes trueWith my experience for the upgrade that still buggy still load of wather mark error on the log,Also we have already moved to N9K already, VPC with layer 3 works well,Back to this topic, if any one wants to update that , do not expected ISSU w...
Hi Ti WangI haven't tried the latest code, but I remember that is more related with the H/W, end up I have no choice to setup the firewall policy to allow such control traffic running over my data plate.
If you reboot one by one, then you can retain some of the line card operating in one chassisI was reboot one by one, but found that the up time is really long, , after the switch is up, then it will check all line card one by one, also UPGRADE them O...
