Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a guest network setup on WLC 9800-40 version 17.12.2 with ISE (3.1)as radius server. Central web auth is configured with self registered user. Captive portal loads fine and registration of new user is fine.However after login with credentials...
Hi Has anyone here managed to recover local console password for WLC 9800? Not able to login to the WLC via console using existing local credentials at the moment. SSH not working either so trying to console into WLC and troubleshoot it.
Dont mind t...
We are planning to do a failover test for C9600 stackwise virtual quad-sup, but not sure if there is anything we need to verify first.Understand that in failover situation, the stackwise standby(chassis 2) should take over as active role in matter of...
Can anyone provide us with a way around this issue with devices on which the password was lost.The provided workaround stops the boot-loop, but does not help the user with a device recovery.
ya seems there is traffic allowd between wlc-ise port 1700.Not sure why is there a delay of more than 5min to be able to connect to the guest_network after key in credentials at the captive portal.
Hi thanks for the reply.1. Dont see any traffic denied/allowed on FW for port 1700 between the client in WLC and the ISE2. Yes enabled the override3. Yes CoA and Key configured.
It is C9800-40-K9 model. WLC is staged in other location at the moment. Will try to get more info when have access to it.Basically it was the usual booting up seq and we breaked it to reach to the rommon mode.Thanks for replying.
