Hi guys, I need some help please. to make it simple, I have Three layer 3 devices A, B and C.PC A (192.168.1.1/30) (VPN IPSEC Client)-------IPsec VPN--------(192.168.1.2/30) router B------------ PC COn the PC A : The IP address on the physical interf...

Hi guys,  I have a Cisco switch configured with two vlans : VLAN 10 : VoiceVLAN 20 : DATA My switch ports are configured as shown below : interface GigabitEthernet1/0/Xswitchport mode accessswitchport access vlan 20switchport voice vlan 10. When I co...

Hi Guys,  we are building a big network. and we have an Excel flow matrix that we have to keep updated. Today, the Excel flow matrix is becoming huge and laborious to keep it updated. Do you guys use a handy tool (app or else) to generate your flow m...

Hi Guys, My customer must have a user (Read-only) account allowing him to see the router configuration as : Show runsh ip int brsh logg*and all the show commands. Thanks for your help, Marc 

Hello Guys, Can any one help please ? till now our WLCs authentication were based on local accounts. We would like to do the authentication trough the our tacacs server( IP 10.23.49.76) I been reading about, and here is why i've got : - config tacacs...