Hi Luis, the catalyst its a 3750. I send you the config,int r f1/0/1 - 24 switchport mode access speed 100 duplex full dot1x pae authenticator dot1x port-control auto dot1x host-mode multi-host spanning-tree portfast spanning-tree bpduguard en...

Hi Scott, We use certificate width AIR-AP1120G-A-K9 (external Radius) and its working well, but when we use certificate to AIR-AP1120B-A-K9 (external Radius) this AP dont authentication.Why happen this problem? Regards,Martin

Hi, The server to cisco 1130 have 3GB of memory, we need replace one bad memory the 1G which this description:PC2100R -25331-NO (M312L2828ETO-CBO) 1GB DDR PC2100 CL2.5 ECC /Samsung.Why is the code?Regards,Martin

Hi, But I need to know why these two supply is in active? RO_MSFC_HIPOLITO#sh power system power redundancy mode = redundantsystem power total = 2331.00 Watts (55.50 Amps @ 42V)system power used = 1038.66 Watts (24.73 Amps @ 42V)system pow...

Hi, The problem is that the Server change.I need to know if it is possible to be realicar with a board of L4 for a WS-6500.Regards, Martín