About Karl Wilson

Karl Wilson · 05-28-2024

Hi Guys, Does anyone know the safest way to add more ports to M5 240 servers running UCSM. I have a box that uses Mlon 25/40 connections. I want an additional ethernet port to span traffic in promiscuous mode. I believe the lom ports are disabled and...

Karl Wilson · 05-21-2024

Hi Guys, Has anyone experienced a switch always loosing the snmp comms on a reboot via the dnac? The settings are still present on the network switch but i have to run a re-discover to fix the communication. NCIM12006 is the error code. once i do the...

Karl Wilson · 04-11-2024

I have this same issue on 2.3.5.5... not sure if this is affecting switch templates from time to time. Does anyone know what impact this has? if any?

Karl Wilson · 02-15-2024

Hi Guys, I have a DNAC dr 2 node setup on 2.2.3.5 and one of the nodes failed due to a memory issue. It failed to the secondary but the main site was frozen for about a week. I have tried to re-join the cluster and also pause the cluster but i get ...

Karl Wilson · 05-30-2023

Hi Guys, Im doing some work in DNAC for the security advisories and im trying to match on Regex commands. Im running the following command show running-config | include ip http server|secure|active But the problem is the bottom flag up from the confi...

Karl Wilson · 09-06-2024

Tac fixed it... Was 2 years ago so can't really remember. BU was working through the DB to fix it

Karl Wilson · 05-29-2024

Thanks Kirk, it was along the lines of what i guessed but needed confirmation as i personally haven't tried it..... Many thanks

Karl Wilson · 05-21-2024

Thanks Daniel, What version are you now running? 17.9.5 which im on should address both them bugs

Karl Wilson · 05-21-2024

ah... i think my snmp-server user is disappearing.... still testing

Karl Wilson · 10-26-2023

Thats how i done it in the end.... The reason being if you have the no ip http server it shows with running the commands above... using the ^ function i can say it must start with... So basically iv'e excluded the no command with my lines

Member Since	‎05-15-2018 07:33 AM
Date Last Visited	‎11-05-2024 02:59 AM
Posts	44
Total Helpful Votes Received	17

User Statistics

User Activity

Hyperflex M5 240 mlom/lom

Dnac - Switch snmp auth failure on reboot

CSCwi97225-False positive alert Managed Service elasticsearch RUNNING

DNAC dr issue

Regex grep help

Re: SGT DNAC error

Re: Hyperflex M5 240 mlom/lom

Re: Dnac - Switch snmp auth failure on reboot

Re: Dnac - Switch snmp auth failure on reboot

Re: Regex grep help