Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I'm trying to connect to a device's console port through an ISR431. It's a new router out of the box. When I connect a laptop to the console port, it works just fine. When I connect the router to the 4351 and try to SSH to the VTY line, I d...
Hi, I'm trying to configure a 93180 an allow SCP. I configured an IP 1.1.1.1/24 on the port. On my workstation, I put 1.1.1.2/24. I can ping the switch from the WS but I can't ping the WS from the swtich. I added a default route to .2. Is there...
Hi, I'm trying to connect two 93180 switches. However, when I connect the sfp into the switch the amber light on the interface goes out. When I connect the fibers to the sfp, the switches will not establish a link. I defaulted the interface and ha...
I am creating an ACL with remark statements. When go to view the configuration the remarks statements are not showing. I'm running an ASR 1006 with 15.0(1)S2. Is there anything that I'm missing?
access-list 160 remark --------------------------...
Hello all,
I have two ASR routers that I use for my edge router. Each router has one connection each to the same ISP on different routers from the ISP. Each router is set up as a router on a stick with seven sub interfaces. Each interface is a di...
So, Im connecting to the console port via ssh to ISR. The command would be something like ssh -l <username>:[email protected]. That would take me to the vty line that's connected to the console port. It works with an existing router that is connect...
Thanks BB. This was half of the problem. I found the FW was turned back on after it was disabled months ago and another security app was installed on the WS.
After looking at the adapters closer it appears we have the wrong adapter. Our Cisco box has Mellanox qsfp adaptors in them so it looks like someone has put our Cisco models somewhere else. I have to see if we can find them. Thanks for this link
