02-24-2021 11:39 AM
Hi,
I'm trying to configure a 93180 an allow SCP. I configured an IP 1.1.1.1/24 on the port. On my workstation, I put 1.1.1.2/24. I can ping the switch from the WS but I can't ping the WS from the swtich. I added a default route to .2. Is there anything else that is needed to allow the switch to ping the WS?
Solved! Go to Solution.
02-25-2021 07:49 AM
Thanks BB. This was half of the problem. I found the FW was turned back on after it was disabled months ago and another security app was installed on the WS.
02-24-2021 02:31 PM
if WS is Windows it got default FW enabled, disabled and try,
or try SCP see if that works.
02-25-2021 07:49 AM
Thanks BB. This was half of the problem. I found the FW was turned back on after it was disabled months ago and another security app was installed on the WS.
02-25-2021 08:03 AM
Nice to know and it was resolved we mark this as solution now - thank you.
02-25-2021 03:34 AM
Hi,
Please note that the management port (mgmt0 interface) is assigned to the management vrf by default. As such all the static/default route settings for this interface should be configured under the "vrf context management". And also the ping command should read:
"ping 1.1.1.2 vrf management".
Best regards,
Antonin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide