About hiepnguyenho

hiepnguyenho · 03-23-2012

Hello everyone,HO Router -------- ( Internet ) -------- Branch RouterI have to build VPN tunnel between Routers. The Router in HO has direct connection to Internet and have static public IP address. However, the branch Router connect to Internet via ...

hiepnguyenho · 12-10-2011

Hello everyone,There's a lot of public and simple tool to flood attack a host with TCP, UDP packet. These tools can send TCP/UDP packet very fast and quickly bring down weak network devices & servers.We are going to public a website and i'm worry abo...

hiepnguyenho · 11-01-2011

Hello everyone,I'm deploying IPSec Remote Access VPN for my company. I have Cisco ASA 5540 (8.0.4) and Cisco Secure ACS. I have successfully configured the system with authentication by ACS.The question is, I want to apply filter policy for per user....

hiepnguyenho · 10-17-2011

Hello everyone,I am planning to deploy ASA 5580 in one arm mode for Data Center. The question is, if I use C6509 with FWSM, I can deploy the firewall in transparent & one arm mode with bridge-group on FWSM. But I have 5580 appliance, if I deploy ASA ...

hiepnguyenho · 09-28-2011

Hello everyone,I'm configuring Cisco Easy VPN on Cisco Router 2821 - C2800NM-ADVENTERPRISEK9_IVS-M, Version 12.4(9)T7.If I apply crypto map to fast ethernet interface and connect VPN Client from LAN, everything is ok. If I apply crypto map to Dialer0...

hiepnguyenho · 11-13-2011

Hi Mohammed,Yey, great news. Thank you for your information.

hiepnguyenho · 11-03-2011

Thank Mike, that's exactly what i'm looking for. I create downloadable ACL and assign it to user and it works great Now I have per-user policy for remote access VPN.

hiepnguyenho · 10-18-2011

Yes, thanks a lot Rick. One better thing of FWSM is in transparent mode, it support bridge-group, that can support 8 pairs of interfaces. For ASA Appliance, it support only 1 pair of interfaces for one-context. So if I have to deploy many server subn...

hiepnguyenho · 07-26-2011

Dear Anu,I just tried to ping from FWSM Active and the running version is 4.0(6).I run VRRP on the switch. Thank you.

hiepnguyenho · 07-12-2011

@Dat: Yes, of course they can... I also tracert from each end.

Member Since	‎03-16-2010 07:22 PM
Date Last Visited	‎07-04-2018 12:05 AM
Posts	110
Total Helpful Votes Received	42

User Statistics

User Activity

Router as Remote Access VPN Client??

Create a custom signature to rate limit (packet/sec) on IPS 4200?

VPN filter per remote access user (via ACS)?

Deploy ASA 55xx in transparent - one arm mode?

IOS Easy VPN - crypto map on dialer0 interface problem

Deploy ASA 55xx in transparent - one arm mode?

Re: VPN filter per remote access user (via ACS)?

Deploy ASA 55xx in transparent - one arm mode?

FWSM Active/Standby IP Address

SIP trunk call - no RTP message