Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am setting up an IPTV-based video distribution for a customer and they would like to output video to a group of television monitors all located within the same room. To play an intermix of live captured events and pre-recorded company commercials,...
I have a customer that is experiencing random connectivity problems through a PIX firewall running 6.1(1) code. Config is pretty standard conduits and statics. Every few months, one of their servers becomes unreachable. The problem can be seen by ...
Using 4.4(7) code on a pix 515, default fixup statement for ftp, and both NAT and PAT configured. FTP requests for large files hang after a seemingly random amount of time. I reviewed the field notice regarding PTR records in the DNS, but I don't t...
Has anyone encountered issues in connecting a Cisco router to an Ascend Pipeline router over FR? I am seeing very strange issues. The link comes up, line protocol is up, but I don't seem to be able to get unicast traffic across the link. Broadcast ...
I would like to be able to implement h.323 video conferencing between three sites that will be linked via VPN over the Internet. I seem to recall that IPSEC and H.323 did not work together. Has a solution for this been developed? Are there other i...
experienced this issue on several 2960x stacks running 15.2(7)E2 which is the current recommended version for 2960x. Pulled all of the power cords in the stack and removed the stacking cables and SFP's. Brought the switches back up one at a time, r...
Were you able to make this work? I am working on a similar project with Polycom phones and NPS, but not having much luck getting the phones to authenticate with MAB. When you setup the Connection Request Policy, did you then also have a Network Pol...
Steve,
Did this ever get resolved?
I have a customer seeing the same on a new stack of 3850's. Also have occasional ports that will not provide power despite there being more than enough power available on the switch. Customer switch is running ...
The bandwidth term is correct, but remember that the delay value in the formula is expressed in 10s of microseconds. So the correct value is [10000000 / 512 + 2000 ] *256 = 5512000. Pretty close to the value the router calculated.I've always assume...
I agree that the explanation of the IGRP and EIGRP metric in all of Cisco's documentation does not work for the reasons you've pointed out. This issue pops up every now and then and I haven't ever seen a good explanation from Cisco. The only thing ...
